Loop Wyke / Tellgreen Jet Workings

Geotag Icon Show on map

Access to these workings can be tricky, the quickest route is probably via ropes to the beach at Deepgrove Wyke near the southern portal of the Sandsend Tunnel, also check the tide tables before setting off.

There are a series of large cuttings into the base of the cliff, these are then interconnected by a passage running parallel to the shore, the whole cliff is very unstable and should be visited with caution.

The most easterly cutting contains a shelf approximately 6ft high, progressing onto this there are two distinct passages both filled with washed-in debris (including a step ladder) and collapses. The workings are fairly high with plenty of head room.

Loop Wyke Jet Mines Loop Wyke Jet Mines Loop Wyke Jet Mines

A high parallel passage runs inside the cliff to the second cutting, however there are no deeper workings behind this entrance.

Loop Wyke Jet Mines Loop Wyke Jet Mines Loop Wyke Jet Mines

A waterfall empties over the third large cutting, behind this entrance are again much deeper passages into the cliff.

Loop Wyke Jet Mines Loop Wyke Jet Mines Loop Wyke Jet Mines

After about 20m the workings again become clogged with washed-in debris and roof collapses.

Loop Wyke Jet Mines Loop Wyke Jet Mines Loop Wyke Jet Mines

 

 

3 thoughts on “Loop Wyke / Tellgreen Jet Workings

  1. The ropes are just to help you get up and down the slopes, they are used by fisherman and don’t require special equipment or skills.

  2. Access is quite easy to the foreshore down Overdale which is near the south end of Sandsend Tunnel. A well defined path with steps and a steel ladder at the bottom is easily usable but progress along the foreshore must be in time with the tides.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.